Chimney Repair in Antioch, CA | Chimney Sweep Antioch

Chimney Repair in Antioch - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Repair for Antioch Homeowners

Chimney problems in Antioch usually announce themselves quietly: a stain on the ceiling after the first fall rain, a cap that’s gone missing, mortar that crumbles when you brush it with a thumb. By the time smoke backs into the room or water drips into the firebox, the damage has usually been spreading for a season or two. We handle the repair side of that work, from cap and crown fixes to liner resurfacing and relining, and we do it with the same professional-grade materials full-service contractors specify. Our technicians have up to 15 years of experience, and we’re authorized to work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield product lines. When an inspection turns up a problem, we can fix it rather than refer it out. Call (844) 352-4625 and we’ll book your repair estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Call (844) 352-4625

Chimney Cap Installation

Chimney Cap Installation means fitting a proper cover over the flue opening so rain, birds, squirrels, and wind-blown debris stay out of the chimney you paid to have swept. A chimney without a cap is an open hole on your roof, and in Antioch’s hot summers and wet winters it takes on water and wildlife year-round. We fit Gelco and Famco caps sized to the actual flue, not a universal slab that rattles loose in the first wind. Most cap installations fall in the $300-$650 range depending on flue count, cap style, and roof access, and the written estimate sets the final price. If you’re already due for a sweep, we can handle both in one visit and note the cap condition on the report.

How We Size a Cap to the Flue

We measure the flue opening and the crown footprint, then match the cap to both. A cap that sits too flat or too tight restricts draft on a wood-burning fireplace, and you’ll feel that as smoke spilling into the room. Getting the fit right the first time avoids a second trip.

Multi-Flue and Insert Chimneys

A chimney with a fireplace flue plus a furnace or water heater flue needs a cap that covers both without sealing the second opening. We look at every flue before quoting. Gas inserts sometimes need a different cap profile than an open wood fireplace, and we’ll say so plainly.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Replacement

Chimney Cap Replacement is the right call when the existing cap has rusted through, lost its mesh, bent in a storm, or was never the right size in the first place. Missing or damaged mesh is the most common reason a chimney fills with nesting material, and a rusted solid-top cap traps moisture against the crown instead of shedding it. We remove the old cap, check the flue tile and crown underneath for damage the failed cap may have allowed, and install a properly fitted replacement. Typical cap replacement in Antioch runs $350-$700 depending on style and how much roof access is involved; the written estimate sets the final price. If the crown needs attention at the same time, we’ll show you the photos before recommending anything.

What a Failed Cap Lets In

Once the mesh tears, birds and squirrels move in fast, and their nesting material sits directly above your firebox. Rain follows the same opening and soaks the flue and the top of the smoke chamber. That combination is why we treat a loose or missing cap as a repair, not a cosmetic item.

Choosing a Replacement Style

Single-flue stainless caps hold up well against weather; multi-flue caps suit chimneys with several openings under one crown. We work with Gelco and Famco components and match the style to your flue count and roofline. You’ll see the options and the price before we order anything.

Chimney Liner Installation

Chimney Liner Installation replaces a cracked, deteriorated, or undersized flue liner with a properly matched system, and it’s the repair that matters most for safety. The liner is what carries smoke and combustion gases up and out; when clay tiles crack, heat and carbon monoxide can reach the framing around the chimney. We install DuraFlex flexible liner systems, which suit the offset and slightly out-of-plumb flues common in older Antioch homes, and we size the liner to the appliance, not to whatever’s on the shelf. Full relining typically runs $2,800-$6,500 depending on flue height, liner diameter, and whether insulation is required. Where the existing liner is only lightly deteriorated, HeatShield resurfacing can restore it for less. Call (844) 352-4625 to book an inspection first.

When Resurfacing Beats a Full Reline

HeatShield is applied to the inside of a liner that’s still structurally sound but showing cracks and gaps. It seals those defects without a full tear-out. We inspect with a camera first and tell you honestly whether resurfacing will hold or whether the liner is too far gone.

Liner Sizing for the Appliance

A wood fireplace, a gas insert, and an oil or gas furnace each need a liner sized to their exhaust. An oversized flue runs cold and collects creosote; an undersized one chokes draft. We match the liner to what’s actually connected.

Chimney Flashing Repair

Chimney Flashing Repair addresses the metal that seals the joint where the chimney meets the roof, and it’s the most common source of chimney leaks we find in Antioch. When flashing pulls away, rusts, or was sealed with tar that has since cracked, water runs down the chimney and shows up as a ceiling stain well away from the fireplace. We reset or replace the flashing and seal the edges properly against the roof covering, then check the surrounding shingles and the cricket behind the chimney if there is one. Flashing repair typically runs $400-$900 depending on roof pitch and how much of the assembly needs rebuilding. Water damage left alone spreads into framing, so it’s worth looking at sooner rather than later, and the written estimate sets the price.

How Flashing Fails

Tar and caulk patches dry and crack, and stepped flashing loosens as the roof settles. Once the seal breaks, water tracks along the masonry. We look at the source rather than patching the stain on the ceiling inside.

Flashing on a Roof Valley

A chimney that sits in a roof valley takes more water than one on a simple slope, and the flashing has to be built to shed it. We check the valley metal and the cricket before quoting. Sometimes the fix is more than new flashing, and we’ll show you why.

Chimney Crown Repair

Chimney Crown Repair fixes the concrete cap on top of the chimney that sheds water away from the masonry below. When the crown cracks, water seeps into the brick and flue tiles and starts the freeze-free but still destructive cycle of saturation and spalling. Wide cracks, a crown that’s crumbling at the edges, or one that slopes the wrong way all signal the need for repair. We remove the failed material, rebuild the crown with the correct slope away from the flue, and seal it. Crown repair typically runs $500-$1,200 depending on chimney size and how much of the crown needs rebuilding. Crown work is often done alongside a cap replacement, and bundling the two in one visit saves on roof access. Estimates are free.

Why Slope Matters

A crown has to shed water toward the edges and off the chimney, away from the flue opening. A flat or back-sloped crown holds water on top of the masonry. Rebuilding the slope is part of the repair, not an extra.

Crowns That Are Past Repair

Some crowns crack through to the brick and lifting the old concrete is the only sound fix. We assess that with the same camera work we use on the flue. If the crown can be saved with sealing, we’ll say so.

Chimney Repair Companies

Chimney Repair Companies vary widely in what they can actually do, and that difference is what matters when you’re hiring in Antioch. A sweep-only company can clean and inspect, but many stop there and hand you a referral for the liner or crown. We handle sweeping, inspection, and repair under one roof, so the findings from an inspection can be remediated by the same company. We work with the professional-grade brands contractors specify: DuraFlex liner systems, HeatShield resurfacing, Gelco and Famco caps. Repair pricing across those disciplines typically lands between $300 and $6,500 depending on scope, and we set the final price in a written estimate after seeing the chimney. Compare any quote you get against a company that can show you the camera footage and name the products it will install.

What to Ask Before You Book

Ask whether the company can perform the repair it recommends or whether it will subcontract. Ask for the brand of liner or cap it plans to install. Ask to see the inspection photos. A company that can answer all three is doing the work, not routing it.

The Handoff Gap

The most common failure in chimney work is the referral chain: a sweep inspects, finds a cracked liner, and hands off to someone else who never saw the original condition. That gap costs homeowners time and money. We close it by keeping the whole job in one place.

Chimney Masonry Repair

Chimney Masonry Repair restores the brick, mortar, and stone on the exterior of the chimney, which takes the weather in Antioch year after year. Crumbling mortar joints, spalling brick faces, and loose bricks all let water in and start to undermine the structure above the roofline. We repoint the mortar where the joints are failing, replace spalled brick with matching material, and rebuild sections where the damage has gone past surface repair. Masonry work typically runs $600-$2,500 depending on the extent, though a chimney in bad shape can climb higher, and the written estimate sets the price. Repointing early costs far less than rebuilding later, and a camera inspection tells us what’s behind the failing face.

Repointing vs. Rebuilding

Repointing is grinding out the old mortar and packing in new material that bonds to the brick. Rebuilding is for bricks that have spalled or a top section that’s losing structural integrity. Which one you need depends on how far the damage has gone.

Matching the Original Brick

Older Antioch chimneys often have brick that can’t be matched with a current stock color. We look at what’s there and source the closest match, or reuse sound brick where we can. A mismatched patch shows for decades.

Brands We Service

We work with the same brands professional chimney contractors specify, not whatever ships cheapest. DuraFlex flexible liner systems are what we reach for on full relines, and we know where the system wears and how to size it to the appliance. HeatShield resurfacing is the repair-tier option we offer when a liner is cracked but not past saving, and it extends chimney life without a full reliner cost. Gelco and Famco caps and venting components protect the work we’ve done from weather, animals, and debris, which is why we fit them properly rather than treating them as an afterthought. Olympia Chimney and Copperfield round out the roster of components we work with on repairs.

Familiarity with these brands means we can specify, source, and install the right part rather than subcontracting the technical half of a repair. Whether you have DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, Copperfield, or any other make, we can help. If you’re unsure what’s on your chimney now, a camera inspection tells us what we’re working with before we quote.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • Smoke backing into the room. A draft that used to pull cleanly and now spills smoke usually means a blockage or a liner problem. On gas appliances, a spill can also be a carbon monoxide risk, so it’s worth a prompt call.
  • Water stains on the ceiling or chimney breast. Stains show up away from the fireplace when flashing, a cap, or a crown has failed. Water in the masonry spreads into framing and insulation if left alone.
  • Crumbling mortar on the roofline. Mortar that brushes away with your thumb is past its service life. Repointing early is a much smaller job than rebuilding a chimney section later.
  • A missing or damaged cap. Once the mesh tears or the cap lifts off, birds and rain move in fast. That nesting material sits right above your firebox.
  • Liner tiles in the firebox or a known cracked flue. Cracked clay tiles let heat and combustion gases reach framing. If a previous sweep flagged it, don’t put off the repair.

Our Process, Step by Step

  1. 1
    Book the visit. Call (844) 352-4625. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll ask about the chimney, the appliance, and the symptoms so we bring the right tools.
  2. 2
    Camera inspection first. We run a camera down the flue and photograph the crown, flashing, and cap from the roof. You see what we see, including any defects we’re recommending repair for.
  3. 3
    Written findings and options. We explain what the footage shows and lay out the repair options, including the less expensive option where it’s the sound one. You get a written estimate with the products named.
  4. 4
    Sweep and repair. Once you approve the estimate, we sweep the flue and proceed with the repair using the specified products. If a cap, crown, or flashing repair is in scope, it goes into the same visit where the roof access allows.
  5. 5
    Final report. We leave you with before-and-after photos and a plain explanation of what was done. If a related repair can safely wait a season, we’ll tell you that too.

How Much Does Chimney Repair Cost in Antioch?

Chimney repair in Antioch typically runs from about $300 for a cap replacement up to around $6,500 for a full DuraFlex reline on a tall or complex flue. A typical chimney cap installation in Antioch runs $300-$650 depending on flue count and cap style, while cap replacement on a rusted or damaged unit usually lands at $350-$700. Flashing repair runs $400-$900, crown repair $500-$1,200, and masonry repointing or rebuilding $600-$2,500. Liner work splits into two tiers: HeatShield resurfacing for liners that are cracked but structurally sound, and full relining at $2,800-$6,500 when the liner is past saving. Every range above is typical, and the written estimate sets the final price.

What moves the price most is roof access, flue height, and how many separate defects the inspection turns up. A crown and cap done together in one visit cost less than two separate trips, since the access is already paid for. How to avoid overpaying: insist on camera footage showing the actual defect before approving repair. A company that quotes a four-figure reline without showing you the liner is asking you to trust a diagnosis you can’t verify. Our estimate is free, and we’ll tell you plainly when a repair can safely wait a season. If the liner is sound and only the crown needs work, we’ll say so and quote only that.

Our Service Area Near Antioch

We serve homeowners across Antioch and the surrounding East Contra Costa towns, including Brentwood, Oakley, Discovery Bay, and up through Blackhawk, Camino Tassajara, Alamo, Danville, San Ramon, and Lafayette. Response timing depends on where you are; the closer towns are an easy booking, and we’ll tell you the next available visit when you call. If you’re nearby and looking at liner or crown work, our chimney repair team in Brentwood and our chimney repair team in Oakley handle the same disciplines. Wherever you are in the area, the estimate is free and the inspection comes with photos.

Serving Antioch, CA – Our Local Coverage Area

We serve Antioch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Repair in Antioch

Schedule Your Chimney Repair Service in Antioch Today

If an inspection has turned up a liner, crown, cap, or flashing problem and you’re ready to have it fixed, call (844) 352-4625. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Every estimate is free and no-obligation, and we’ll show you the camera footage before we recommend any repair. See our chimney sweep Antioch page for the sweep side of the work, and our chimney repair overview for the full repair scope.

Written by the team at Chimney Sweep Antioch.

Why Antioch Chooses Chimney Sweep Antioch

We set the standard for chimney repair in Antioch.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Antioch

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Antioch Customers Say

Trusted by homeowners across Antioch and surrounding areas.

★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Diego Salazar
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Devon Jackson
★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Gilbert Reyes

Ready for Chimney Repair in Antioch?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Antioch.

(844) 352-4625

Request a Free Estimate in Antioch

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7