Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across San Ramon
If your chimney cap is sitting crooked after a windy week, or an inspector told you the flue needs work you can’t verify, we’re the crew to call in San Ramon. We work on both ends of this valley: the prefab metal fireplaces in the newer Dougherty Valley neighborhoods and the original brick chimneys in the older ranch homes near downtown. Our technicians have up to 15 years of experience with exactly these two kinds of chimney. Call (844) 352-4625 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday.
Why San Ramon Homeowners Call Chimney Sweep Antioch for Chimney Repair
We’ve built a solid local reputation across San Ramon by doing three things most chimney companies split apart: sweeping, inspecting, and repairing. A sweep without an inspection is guesswork. An inspection without repair capability is just a referral. We handle all of it, so the person who finds a damaged flue or a loose cap is the same one who fixes it. That continuity is why we get repeat calls from homeowners around Canyon Creek and Twin Creeks.
Response time to San Ramon is a real advantage of our service area, since we already work throughout the East Bay. When a cap comes loose in a Dougherty Valley wind event, you’re not waiting days for a callback from a company an hour away. And because we work with the professional-grade brands contractors actually specify – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, Copperfield – we know what’s likely wrong before we arrive and can confirm it with a camera.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Installation in San Ramon
Chimney cap installation in San Ramon is one of the most common jobs we do, and for good reason: a proper cap is what keeps birds, squirrels, and rain out of a flue that was clean before the weather got to it. On the prefab chases common in the Dougherty Valley neighborhoods built between roughly 1999 and 2015, the cap sits on a metal assembly rather than brick, so the correct fit matters as much as the material. A typical chimney cap installation in San Ramon runs $250 – $550, depending on whether it’s a stock cap for a factory-built chase or a custom-fabricated stainless cap for an older masonry chimney near downtown.
Matching the Cap to the Assembly
Factory-built fireboxes use brand-specific caps and chase covers, and a wrong-brand lid won’t seat or seal the way it should. We work with Gelco and Copperfield components, so the cap you get is sized for your actual assembly. That’s the difference between a fix and a temporary cover.
Stainless Over a Masonry Stack
For the older brick chimneys in 94583, a stainless steel cap with a spark arrestor mesh is the standard protection. It keeps out debris and adds a layer of fire safety during the dry Diablo-wind season. We build these to fit the crown, not to sit loosely on top of it.
Chimney Cap Replacement in San Ramon
Chimney cap replacement in San Ramon usually comes up after a wind event, when a homeowner walks outside and finds the cap hanging off or missing entirely. It’s the single most common repair call we get in the newer Dougherty Valley construction, where prefab caps take a beating from valley winds long before the firebox ever sees real use. A typical chimney cap replacement in San Ramon runs $200 – $475, and it’s fast work once the correct replacement is in hand.
Why They Come Loose
Builders install these caps on the original assembly, and over the years the fasteners and seams work loose in the wind. A dislodged cap lets birds and squirrels move in, and it lets rain reach a flue that had stayed dry. Replacing it promptly prevents both problems.
What Else We Check While Up There
A loose cap is a chance to confirm the flue liner and smoke chamber weren’t disturbed. On a factory-built chimney, a damaged flue component means parts and an inspection, not a masonry rebuild. We note what we find and leave you a written estimate before any repair begins.
Trusted Brands We Service in San Ramon
We name the products we use because you should know what’s going into your chimney. Our work draws on professional-grade lines that certified chimney specialists rely on – DuraFlex flexible liner systems, HeatShield resurfacing, Gelco and Famco caps and venting, Olympia Chimney and Copperfield components. These are the same brands full-service contractors specify, not whatever ships cheapest. We don’t claim to stock parts locally or keep a warehouse; what we bring is the product knowledge to specify the right component for your exact assembly and the turnaround that comes with knowing the catalog. When your San Ramon chimney needs a brand-specific cap or a liner solution, we can tell you what fits and why.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in San Ramon Homes
- Wind-displaced caps on Dougherty Valley prefabs. Valley winds pry caps loose on factory chases, letting birds and squirrels into flues that were otherwise clean. These homes often show a dislodged cap on a chimney that’s never burned wood.
- Builder-grade metal fireboxes needing brand-specific parts. Factory flue assemblies are manufacturer-specific, so a wrong-brand cap or damper won’t seat correctly. Getting the right part is the repair; improvising is how problems start.
- Spalling clay flue tiles in older ranch homes. The 1960s – 80s brick chimneys near downtown have original clay tiles that crack and spall after decades of dry summers and long idle periods. This is repointing or resurfacing territory, not a cap swap.
- Cracked crowns and worn flashing. Older San Ramon stacks often show a failing crown or loose flashing where water gets in. Both are fixable before they damage the flue, if you catch them early.
Pricing for Chimney Repair in San Ramon, CA
We give you a written estimate before any work begins, and the estimate sets the final price. A typical chimney cap replacement in San Ramon runs $200 – $475, cap installation runs $250 – $550, mortar repointing and tuckpointing run $400 – $900 depending on how much of the stack needs work, and flashing repair starts around $300 – $650. Chimney waterproofing typically lands in the $350 – $800 range, while a partial rebuild of the top of the stack runs higher. What moves the number is the era of your home: a prefab chase needs different parts than a 1970s brick stack. Estimates are free, and nothing is recommended without camera evidence you can see for yourself.
We Also Serve Cities Near San Ramon
The same repair work carries into the towns around us. Homeowners in Camino Tassajara, Danville, Blackhawk, and Alamo call on us for the same cap, flashing, and flue work we do across San Ramon. Whether your chimney is prefab in a newer development or original brick in an older neighborhood, the diagnosis and the honest recommendation stay the same. If you’re just outside the San Ramon line, reach out and we’ll tell you what we can do. Our chimney repair team handles the whole job from inspection through the fix.
Serving San Ramon, CA – Our Local Coverage Area
We serve San Ramon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in San Ramon
Because on a newer San Ramon chimney the problem is usually the exterior, not worn masonry. Valley winds knock prefab caps loose and let animals into the flue, even on a firebox that’s never burned wood. Call (844) 352-4625 for a free estimate and we’ll take a look.
Yes, it does. Factory-built fireboxes and their metal chases use manufacturer-specific caps, dampers, and flue components, so the right brand matters. An older 94583 brick chimney uses a stainless cap built to its crown instead.
Spalling clay flue tiles and a cracked chimney crown are the most common on the older ranch stock. Decades of dry summers and long idle periods take a toll on the original masonry. We can repoint or resurface rather than rebuild when the tile allows it.
A Level 1 covers a routine annual check, a Level 2 is for a property change or after a known event like a cap loss or liner concern, and a Level 3 is for hidden areas that need opening up. We recommend the level based on what you describe and what we find, and we tell you plainly when a lower level is enough.
Yes. Idle San Ramon chimneys still collect soot, moisture, and pest debris, and a cap or component can fail without any fire ever being lit. An annual inspection catches those problems early. Call (844) 352-4625 for a free estimate and book a sweep, inspection, and any needed repair with one company.
Written by the team at Chimney Sweep Antioch.