Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Danville
Danville homes tend to come with more than one chimney, and that changes how a repair page should read. Plenty of houses off Diablo Road and around the downtown core carry a masonry fireplace in the main living space, an early factory-built flue in a family room, and sometimes a gas insert in a primary suite. Each of those is a separate system with its own liner, damper, and cap. We know this housing stock because it’s the kind of work we do across Danville: per-flue inspection, honest scope, and repair done by the same company that found the problem. Call our chimney repair team at (844) 352-4625 to book a free estimate.
Why Danville Homeowners Call Chimney Sweep Antioch for Chimney Repair
Most calls we get from Danville start the same way: someone bought a 1970s or 1980s house, they had the main fireplace swept, and then they found out there was a second flue nobody had looked at. Houses in 94526 and 94506 that were built with wood-burning fireplaces and early factory-built inserts are now thirty to fifty years old, and many of them are on their second owner. The flues have simply gone longer without service than anyone realized.
We work with the same product lines professional chimney contractors specify – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, Copperfield – rather than whatever ships cheapest. That matters on a multi-flue house, where you might need a flexible reline on one chimney and a crown rebuild on another. We’re also a full-service shop across sweeping, inspection, and repair, so a finding doesn’t turn into a referral. Our technicians have up to 15 years of experience with masonry chimneys, factory-built metal flues, caps, flashing, and water intrusion.
Response into Danville is straightforward: we answer 24/7 and dispatch Sunday through Friday, 7am to 7pm. If you call outside those windows, we book the visit into the next opening.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement in Danville
Chimney Cap Replacement in Danville usually comes up after a wet winter, when a homeowner notices rust streaking down the flue or a draft that pulls smoke back into the room. A cap is the one part of the system exposed to everything, and on a house with several flues, one missing or rusted-out cap means rain, debris, and nesting animals have been dropping into a flue that sat idle through the dry season. We fit caps through Gelco and Famco product lines, sized to the actual flue opening and fitted with a spark arrestor – which matters in Danville, where the surrounding wildland interface raises ember exposure. Typical cost runs $350 to $850 per flue, depending on cap style and whether a custom size is needed.
Sizing and Fit
A cap that’s a half-inch short lets water in at the corners, and a cap that’s oversized rattles loose in valley wind. We measure the flue and the crown, not just the pipe.
Spark Arrestors and Screen Mesh
Mesh size is the balance point: tight enough to stop embers, open enough that draft doesn’t suffer. On factory-built flues we match the arrestor to the listed system.
Chimney Liner Installation in Danville
Chimney Liner Installation in Danville is called for when a camera run shows cracked mortar joints, gaps at the flue tile seams, or a collapsed section on an early metal chimney that has quietly rusted through. A 1970s factory-built flue in a family room is the one most often missed – it gets no sweeping because it gets no fire, and then a second owner finds third-degree creosote or a failed liner behind it. Relining with a listed DuraFlex flexible system or an Olympia Chimney liner brings the flue back to a serviceable condition. Typical cost for a Danville reline runs $2,400 to $5,800 depending on flue length, diameter, and whether the existing liner has to be removed first. Where the liner is only lightly deteriorated, HeatShield resurfacing can restore it without a full reline, at roughly $1,600 to $3,200.
Masonry vs. Factory-Built Flues
Masonry chimneys take a poured or wrap liner sized to the tile. Early metal chimneys take a listed system matched to the original appliance – using the wrong one voids the listing.
Insulation and Draft
An insulated liner holds flue temperature and reduces creosote buildup on a flue that only runs a few months a year. We’ll tell you when it’s worth the added cost.
Trusted Brands We Service in Danville
We name the products we use because you should know what’s going into your chimney. On Danville jobs that means DuraFlex for flexible relining, HeatShield for smoke chamber and liner resurfacing, Olympia Chimney for listed liner systems, and Gelco and Famco for caps and venting components. These are the same professional-grade brands certified chimney specialists specify, and familiar names in the trade. We don’t claim to stock parts locally – we specify the right product for the flue, source it, and install it. That keeps turnaround reasonable without cutting corners on the listing. When we scope a repair on your Danville house, the brand and model go into the written estimate so you can look them up yourself.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Danville Homes
- Multi-flue houses treated as one chimney. A sweeping visit that cleans the masonry firebox and never opens the factory-built flue in the family room or primary suite is the single most common gap we find. The second flue is often the one with the real damage.
- Cracked crown wash and spalling brick on exterior chimneys. Danville’s cold winter mornings work on exterior masonry year after year, and frost action opens cracks in the crown that let water into the brick. Most sweep-only visits walk right past it because the firebox looks fine.
- Third-degree creosote in a flue that sat idle. Long dry summers followed by months of no fires let creosote harden into a glazed, tar-like layer that a brush won’t touch. That’s a repair, not a cleaning.
- Gas-converted fireplaces serviced like wood-burners. A gas insert or log set needs its own inspection of venting, damper position, and clearances. A standard brush-and-vacuum is the wrong call for that appliance.
Pricing for Chimney Repair in Danville, CA
Here’s what repair work typically runs in Danville, quoted per flue rather than per house. A typical mortar repointing or tuckpointing job on an exterior chimney runs $600 to $2,200. Spalling brick repair, where individual bricks are cut out and replaced, runs $800 to $2,800 depending on how much of the face is affected. Chimney waterproofing on a masonry stack runs $400 to $900. Flashing repair at the roof line runs $450 to $1,200, and a partial chimney rebuild on a damaged upper section runs $3,500 to $9,000. Our written estimate sets the final price, and the estimate itself is free. A multi-flue house always needs its own scope, because a fix on one chimney says nothing about the other.
We Also Serve Cities Near Danville
The same per-flue approach applies to the towns around us. We work in Blackhawk, Camino Tassajara, San Ramon, and Alamo, where the housing stock and the climate are close cousins to what we see in Danville. If you’re just over the ridge and your house has a masonry fireplace plus an older factory-built insert, the inspection scope is much the same. Call (844) 352-4625 and we’ll book the visit.
Serving Danville, CA – Our Local Coverage Area
We serve Danville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Danville
Yes. Each flue is a separate system and needs its own Level 2 camera inspection, because a clean report on the masonry fireplace tells you nothing about the factory-built insert in the family room or primary suite. The second flue is often the one with the real problem – collapsed liner, third-degree creosote, or a rusted damper. Call (844) 352-4625 to book both flues in one visit – estimates are free.
Third-degree creosote is glazed, tar-like, and bonded to the flue tile – it looks like hardened varnish, not soot, and a standard brush won’t remove it. It forms when a flue runs cool and slow, which is common on a fireplace that only gets occasional use across Danville’s mild winters. Removing it is a repair-tier job, often followed by HeatShield resurfacing or relining to protect the tile. Call (844) 352-4625 for an honest read on which you need.
It’s a real repair, not cosmetic. Flaking faces and a cracked crown wash mean water has been getting into the masonry, and once it freezes on a cold valley morning, the brick spalls further and the crack widens. Left alone, it works down into the flue. Crown rebuild, spalling brick replacement, and waterproofing are the standard fix. Call (844) 352-4625 – the estimate is free and we’ll tell you plainly whether it can safely wait a season.
Yes, but it’s a different service call. A gas insert or log set needs its own inspection of the venting, damper position, and clearances, not a standard brush-and-vacuum. Gas appliances also produce moisture that can degrade a flue over time, so the annual check still matters. Call (844) 352-4625 and we’ll scope the gas appliance separately from any wood-burning flue in the house.
Once a year for every flue that sees use, and a Level 2 camera inspection on any flue you haven’t had looked at since buying the house. In a 1970s or 1980s Danville home with two or three appliances, that means a sweep-and-inspect on the working fireplaces and a full camera run on the ones that sat idle. Older factory-built flues are the priority. Call (844) 352-4625 to book the whole house in one visit – estimates are free.
If your Danville house has more than one chimney, or one that hasn’t been opened since the last owner, the right first step is a camera inspection per flue. We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm. Call (844) 352-4625 for a free estimate and a written scope you can actually read.
Written by the team at Chimney Sweep Antioch.