Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Alamo, CA
Chimney inspection in Alamo is a different job than it is in most of Contra Costa County. Homes here sit on large, oak-shaded lots off the Diablo foothills, and many of them have tall exterior or chase-enclosed flues rather than the simple interior masonry fireplaces you find in denser suburbs. That means leaf litter, acorn drop, and wildlife get into flues that are harder to reach. We work with the same brands professional contractors specify – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – not whatever ships cheapest. Call (844) 352-4625 for a free estimate. Our technicians have up to 15 years of experience.
Why Alamo Homes Are Different
Alamo’s housing stock is mostly custom and semi-custom single-family homes built between the 1960s and the 2000s, on lots that often run an acre or more. Tile roofs and wood-shake roofs are common, and so are multiple fireplaces per house: a masonry fireplace in the living room, a prefab in the family room, sometimes a third in a converted space. That changes how we inspect. A single visit can mean checking more than one system and more than one flue.
The climate adds its own layer. Alamo sits in a warm inland Diablo Valley microclimate with hot, dry summers and frequent Spare-the-Air burn bans, so fireplaces go unused for months and then see heavy winter use. Creosote builds during that winter stretch, and summer oak litter fills caps and spark arrestors while nothing is burning. By the first cold snap, a flue that drafted fine last March may be blocked or restricted. The ZIP code 94507 covers most of the community, and the work we do there reflects those two seasons more than anything else.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Alamo Services
Most calls we get from Alamo homeowners start with one of two things: a chimney that needs sweeping before the season, or a chimney that a previous inspector flagged for repair. Here is what each involves.
Chimney Sweep in Alamo
Sweeping in Alamo means getting the right brush and the right access to flues that are often tall, exterior-mounted, or enclosed in a chase. Oak debris and acorn drop collect on caps and spark arrestors through the summer, and squirrels nest in flues that sit unused during burn bans. We sweep the flue, clear the cap and screen, and remove what came down. A firm price is agreed before we book. For the full breakdown, see Chimney Sweep in Alamo.

Chimney Repair in Alamo
Repair work on Alamo chimneys usually centers on caps, crowns, and liners that have taken winter storm damage after a dry season. Tile and shake roofs mean access has to be planned carefully, and tall exterior chimneys need a closer look at the cap and flashing than a short interior stack would. When a liner is deteriorating, HeatShield resurfacing can restore it without a full reline, and we will tell you honestly which you need. Details are on our Chimney Repair in Alamo page.

Chimney Inspection in Alamo
Chimney inspection in Alamo answers a specific question: is this flue safe to burn in, and if not, what exactly needs to happen? Homes built from the 1960s through the 2000s with multiple fireplaces, tall exterior stacks, and oak canopy overhead tend to accumulate debris and nest material in places a flashlight from the firebox won’t show you. A proper Chimney Inspection connects what we see on camera to what we recommend, and because we also do the repair work, nothing gets handed off to a second company. We answer 24/7. Fast dispatch, 7am-7pm.
Fireplace Inspection
The fireplace is where most Alamo homeowners notice a problem first, usually a smoky draft or a smell that shows up when the season changes.
Signs you need it
A fireplace that smokes back into the room, smells of creosote when it’s cold out, or has visible cracks in the firebox brickwork is due for a look.
What it costs in Alamo
A fireplace inspection typically runs $99 to $199, and a full inspection combined with a sweep is usually $149 to $299.
How we do it
We check the firebox, damper, smoke chamber, and the first section of flue, then document what we find with photos you can look at yourself.
Chimney Flue Inspection
Flue inspection is the part that matters most in Alamo, because the flue is what fills with oak litter and nests while the fireplace sits unused through a hot, dry summer.
Signs you need it
Debris falling into the firebox, a cap that’s clogged or missing, or a flue that hasn’t been looked at since the last burn season all point to needing one.
What it costs in Alamo
Flue inspection falls inside the same typical range as a standard inspection, roughly $99 to $249 depending on access and how many flues the house has.
How we do it
We run a camera down the flue from the top where access allows, check for cracks, gaps, and blockages, and give you the footage and a written summary.
What Chimney Inspection Costs in Alamo
These are typical ranges for Alamo, not fixed prices. The written estimate sets the final number.
| Item | Typical range in Alamo |
|---|---|
| Standard chimney inspection | $99 – $249 |
| Inspection with camera and photo report | $149 – $299 |
| Level 2 inspection | $199 – $399 |
Do I need a Level 2 chimney inspection in Alamo?
You do if you’ve bought the house, changed the appliance, or had a chimney fire. A Level 2 inspection covers the attic, crawl spaces, and accessible portions of the flue that a basic check doesn’t reach. Call (844) 352-4625 and we’ll tell you which level fits your situation – estimates are free.
How do I know if my Alamo chimney has had a fire?
Look for puffy, honeycombed creosote, warped metal on a prefab, or cracked tiles in the flue. A camera inspection confirms it. If you suspect a fire, don’t burn until it’s been inspected. Call (844) 352-4625 for an exact quote.
Brands We Service in Alamo
We work with Gelco and Olympia Chimney caps and venting components, and with Famco products where they fit the system. We don’t claim stocked parts on a truck – we specify what the chimney needs and source it. See our brands for the full roster.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Alamo, CA
Every figure below is a typical range. The written estimate sets the final price, and it’s agreed before we book.
| Service | Typical range in Alamo |
|---|---|
| Standard chimney inspection | $99 – $249 |
| Inspection with camera and photo report | $149 – $299 |
| Level 2 inspection | $199 – $399 |
| Chimney sweep | $149 – $299 |
| Sweep and inspection together | $199 – $399 |
| Chimney cap replacement | $199 – $499 |
| Crown repair | $299 – $799 |
| HeatShield liner resurfacing | $1,200 – $3,500 |
| DuraFlex liner installation | $2,500 – $6,500 |
In Alamo, price climbs with roof access (steep tile and shake roofs take more setup), how many fireplaces the house has, and whether the cap and crown need replacement alongside the flue work. Tall exterior chimneys also mean more staging than a short interior stack. We give you the number upfront and hold to it.
Neighborhoods We Serve in Alamo
We work across Alamo and the surrounding Diablo foothills, from the estate lots off Alamo Pintado to the streets closer to the Danville line. Homes set back among oak and eucalyptus canopies are the norm here, and that shapes what we bring: longer ladders, camera equipment for tall flues, and time for cap and spark arrestor clearing. Expect scheduling within a normal service window rather than a rush. Fast dispatch from 7am to 7pm, Sunday through Friday.
- Alamo Pintado and the estate lots off the main corridors
- Streets backing onto oak woodland south of downtown Alamo
- The area near the Danville border
- Homes along the Diablo foothills side
Service Area – Cities Near Alamo
Alamo sits between several communities we cover regularly. If you’re just outside Alamo, we can usually reach you on the same schedule. We work in Danville, CA just to the south, Lafayette, CA to the west, Blackhawk, CA to the east, and San Ramon, CA further south. Each has its own housing mix and its own chimney issues. Call (844) 352-4625 to confirm coverage for your address.
Serving Alamo, CA – Our Local Coverage Area
We serve Alamo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Alamo
Alamo is within our normal service area, so we can usually schedule within a regular service window. Call (844) 352-4625 and we’ll give you the next available slot. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday.
Most chimney sweeping and inspection work doesn’t require a permit. Structural repair or a full reline may, depending on scope. We’ll tell you when a permit applies so you can check with the city before work starts.
Yes. Some Alamo communities have rules about exterior changes like cap styles or visible venting. We’ll review what’s proposed and note anything that may need HOA sign-off before we schedule the work.
Call (844) 352-4625 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Whether you’re due for a sweep, need an inspection before the burn season, or have a repair a previous inspector flagged, we’ll give you a straight answer and a price agreed upfront. Chimney Sweep Antioch connects Alamo homeowners with independent local chimney professionals who do the work.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Alamo Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Diego Salazar"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Devon Jackson"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Gilbert Reyes