Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Antioch?
Chimney repair in Antioch typically runs $275 to $1,800 for most jobs, with a crown rebuild or cap replacement near the low end and a partial reline pushing toward the top. A HeatShield resurfacing of a deteriorating liner usually lands between $900 and $1,600 and can spare you the cost of a full reline. The written estimate you get after an inspection sets the final price.
Chimney Repair Cost Breakdown (2026)
Every chimney is different, but the line items below show what the common repairs cost in the Antioch market. Treat these as typical estimates, not fixed prices.
- Chimney cap replacement (Gelco, Famco or Copperfield): $150-$450 installed
- Crown repair (patching small cracks): $250-$550
- Crown rebuild (full removal and repour): $650-$1,200
- Masonry repointing (mortar joints): $400-$900 depending on how many feet need work
- Flue tile crack repair: $300-$700
- HeatShield liner resurfacing: $900-$1,600
- DuraFlex flexible liner installation (full reline): $2,200-$4,800 for a single-story home, more for taller runs
- Damper replacement: $250-$600
- Smoke chamber repair: $350-$900
- Water leak diagnosis and repair at the flashing: $200-$600
- Full chimney sweep and inspection before repair: $150-$400
What pushes a job toward the top of the range
Height is the biggest cost lever. A two-story chimney needs more staging, more liner material, and more labor time than a single-story run. Access matters too: a roof that’s steep or hard to reach from a ladder adds setup time. The scope of the damage also moves the number, since a hairline crack in the crown is a very different job from a crumbling crown and a compromised flue tile at the same time. If you have to do more than one repair on the same visit, you’ll usually save on the smaller items because the technician already has a safe working setup in place. On the other side, a small crown patch or a single cap swap done on its own tends to sit at the low end of the range.
What Affects Chimney Repair Pricing in Antioch
Antioch sees long dry summers and a rainy winter stretch, and that cycle works on a chimney in specific ways. The sun bakes the crown and mortar while the wet season lets water into any crack that’s already there. Here’s what we watch when we price a job here.
- The condition the chimney is in when we arrive. A chimney that’s been swept and inspected regularly usually needs less work than one that hasn’t been opened up in years. If the flue is clogged with soot and creosote, we may need to sweep before we can even assess the liner, and that adds a line item.
- Whether the liner can be saved. HeatShield resurfacing can restore a deteriorating liner without a full reline, and that’s often the difference between a $900-$1,600 job and a $2,200-$4,800 one. We tell you honestly which you need once we can see the flue.
- Chimney height and roof pitch. Both affect staging, safety and labor. A tall chimney on a steep pitch takes more setup than a short one on a shallow roof, and that shows up in the estimate.
- The number of components involved. A chimney crown, cap, flashing and flue tile all work together. If more than one needs attention, the total climbs, but doing them in one visit also saves money versus separate trips.
- Brand availability for products. We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield, so the cap or liner you need is specified by brand rather than whatever ships cheapest. The product cost is part of the picture, and knowing what fits your flue is how we keep the estimate accurate.
- Whether a repair is structural or cosmetic. A cosmetic crown patch is quick. A structural rebuild of the top of the chimney takes masonry work and more time.
How to Save on Chimney Repair
Most of the money in chimney work is decided before the technician arrives. These are the practical moves that keep a repair bill down.
- Get the inspection done before the damage spreads. A small crown crack is far cheaper than a crumbling crown plus a wet smoke chamber. Water is the enemy here, and catching it early is the single biggest saving.
- Fix the flashing and cap first. A properly sealed chimney cap (Gelco and Famco make solid ones) and sound flashing around the roof line keep water out of the masonry. That’s often the cheapest repair that protects the most.
- Ask about HeatShield before you agree to a full reline. Liner resurfacing can extend the life of a deteriorating liner and it costs less than a full DuraFlex installation. Not every liner qualifies, but it’s worth asking.
- Bundle repairs onto one visit. If the crown, cap and damper all need work, doing them together saves on setup and access charges versus three separate visits.
- Get a free estimate in writing. Call (844) 352-4625 and we’ll inspect, then give you a written estimate that lists the repairs and the price for each. The written estimate sets the final price, and there’s no charge for the estimate itself.
Signs You Need Chimney Repair (Not Just a Sweep)
A sweep cleans. A repair fixes. The line between them is usually visible from the ground or the firebox. If you spot any of these, it’s worth a closer look.
- Crumbling or missing mortar between the bricks on the outside of the chimney
- A crack in the crown, or pieces of the crown flaking off
- Rust on the damper or a damper that won’t open or close cleanly
- Water stains on the firebox walls or the ceiling near the chimney
- A missing or damaged chimney cap
- A smell of smoke in the room when the fire isn’t burning
- White staining on the exterior brick, which often means moisture is working through the masonry
If you see any of these, it’s worth booking an inspection and a chimney repair assessment together, so the company that finds the problem is the one that fixes it. A sweep without an inspection is guesswork, and an inspection without repair capability is just a referral.
Safety caveat for chimney work
Chimney work involves height, fire risk and, on gas appliances, gas lines. We don’t recommend testing a damper, opening up a flue tile, or working on a chimney from a ladder yourself. Leave the ladder work, the flue interior and anything involving a gas line to a trained professional. The risk of a fall or an undetected gas leak is real, and it isn’t worth saving a few hundred dollars to take on.
Repair or Replace? How We Decide
The repair-versus-replace question is at the heart of nearly every chimney estimate. Here’s the honest framing we use.
Repair makes sense when the liner is still structurally sound and only a section is deteriorated. A HeatShield resurfacing can restore that section and extend the chimney’s life without the cost of a full reline. It also makes sense when the crown or cap is the problem, or when a single flue tile is cracked.
Replacement or reline makes sense when the liner has failed in multiple places, the flue is undersized for the appliance, or the damage is structural and a resurface won’t hold. In those cases a DuraFlex flexible liner system is the proper solution. It’s a bigger job, but it’s the one that makes the chimney safe to use again.
We give you both numbers when both are realistic, and we tell you which one we’d choose if it were our chimney. That’s the value of a company that sweeps, inspects and repairs under one roof: you don’t get handed off to someone else once the diagnosis is made.
Why Product Choice Affects What You Pay
Chimney repairs are only as good as the material that goes into them. A cap that rusts out in two years, or a liner that doesn’t hold up to a wood fire, ends up costing more than the difference in up-front price. We work with an industry-recognized roster of professional-grade brands because those are the products that last.
- DuraFlex flexible liner systems for relines, specified and sourced for your flue rather than ordered blind.
- HeatShield liner resurfacing for deteriorated liners that don’t need a full replacement.
- Gelco and Famco for chimney caps and venting components, the exterior pieces that protect the interior work.
- Olympia Chimney and Copperfield for the caps and accessories that finish the job properly.
We name the products we use because you should know what’s going into your chimney. That’s also why our estimates are itemized: you can see the product and the labor as separate lines, not a single bundled number you can’t question.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Antioch?
Most chimney repairs in Antioch cost $275 to $1,800, with a cap replacement or small crown patch at the low end and a partial reline or HeatShield resurfacing at the high end. A full DuraFlex reline runs $2,200 to $4,800 for a single-story home. Call (844) 352-4625 for an exact quote, estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper. HeatShield lining resurfacing typically runs $900 to $1,600 versus $2,200 to $4,800 for a full reline. Repair only makes sense when the liner is still structurally sound. When it isn’t, replacement is the right call.
How much does a chimney crown repair cost in Antioch?
A crown patch runs $250 to $550, while a full crown rebuild costs $650 to $1,200. The crown is the top surface that sheds water, so it’s one of the most important parts of the chimney. Call (844) 352-4625 to get it looked at.
Can you come today for a chimney problem?
We offer same-day service when the schedule allows, and the estimate is always free. Call (844) 352-4625. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Does a chimney sweep cost extra before a repair?
A sweep and inspection before a repair typically runs $150 to $400. It’s often necessary, because a technician can’t assess a flue that’s full of soot and creosote. It’s money well spent when it catches a liner problem early.
When to Book a Chimney Repair in Antioch
Fall is the busiest stretch for chimney work here, because people want the chimney checked before the first fire of the season. If you’ve been ignoring a cracked crown or a missing cap through the dry months, the rainy season is when water finds its way in. Booking ahead of that window is the easiest way to avoid a bigger bill. If your chimney is showing any of the signs above, or an inspector has told you that repairs are needed, that’s your cue to call.
Your flue, liner, cap and crown are one system, and we service all of it. Sweeping, inspection and repair under one roof means there’s no handoff gap, and no risk of the diagnosis getting lost between companies.
Contact Chimney Sweep Antioch
Chimney Sweep Antioch provides chimney sweep Antioch service, inspection and repair, all handled by the same company. Our technicians have up to 15 years of experience, and we work with the professional-grade brands that certified specialists rely on: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. To get a free estimate for your chimney repair, call (844) 352-4625. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If a call comes in outside those dispatch hours, we’ll book you into the next opening. Same-day service is available when the schedule allows, and the written estimate sets the final price.
Pricing reflects the Antioch market as of 2026. Chimney Sweep Antioch offers free estimates – call (844) 352-4625.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Diego Salazar"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Devon Jackson"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Gilbert Reyes