Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning & Sweep Cost in Antioch?
Chimney cleaning in Antioch typically costs $180 to $340 for a standard wood-burning fireplace, and most homes land near $250. Gas inserts and oil or gas heating flues run less, usually $140 to $240, because there’s less creosote to remove. A Level 2 camera inspection, which you’ll want if you’ve bought the house recently or changed what you burn, adds $150 to $300 on top of the sweep.
Those numbers are estimates for the Antioch market in 2026. The written estimate we give you before any work starts is what sets the final price, and that estimate is free. Our technicians have up to 15 years of experience, and we work with the same brands professional contractors specify – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – not whatever ships cheapest. Call (844) 352-4625 and we’ll talk through what your chimney actually needs.
Key Takeaways
- Standard sweep in Antioch: $180 to $340, typically about $250.
- Gas insert or heating flue sweep: $140 to $240.
- Level 1 visual inspection is usually included with a sweep; a Level 2 camera inspection adds $150 to $300.
- HeatShield liner resurfacing runs roughly $1,800 to $3,600 and can hold off a full reline.
- Full DuraFlex reline: $3,500 to $7,000 depending on flue size and liner length.
- Our estimates are free, and the written estimate sets the final price.
Chimney Cleaning & Sweep Cost Breakdown (2026)
Here’s how the work breaks down for a typical Antioch home. Use these as starting estimates, then get the written number before anyone touches the flue.
| Service | Typical Cost Range (Antioch, 2026) | What It Covers |
|---|---|---|
| Standard wood-burning sweep | $180 – $340 | Rod-and-brush cleaning of the flue, firebox, damper area, and smoke shelf; creosote removal up to what a standard sweep can reach |
| Gas insert / heating appliance flue sweep | $140 – $240 | Cleaning of the smaller flue serving a gas insert, gas log set, or oil/gas heating appliance |
| Level 1 inspection | Usually included with a sweep | Visual check of accessible portions of the firebox, flue, damper, and cap |
| Level 2 camera inspection | $150 – $300 | Video scan of the full flue, including joints, offsets, and the top of the liner |
| Chimney cap replacement (Gelco, Famco) | $180 – $450 | New cap and hardware sized to the flue; keeps out rain, animals, and debris |
| HeatShield liner resurfacing | $1,800 – $3,600 | Castable resurfacing of a deteriorating liner where the structure is still sound enough to hold it |
| DuraFlex flexible reline | $3,500 – $7,000 | Full stainless flexible liner installation for a cracked, damaged, or undersized flue |
The biggest price driver is what the sweep finds once the brush is in. A clean flue with a sound liner sits at the bottom of the range. A flue with glazed creosote, a cracked clay liner, or a missing cap pushes the job into repair territory, and that’s where the number climbs. A sweep without inspection is guesswork. An inspection without repair capability is a referral. We do all three disciplines – sweeping, inspection, and repair – so the findings from the camera don’t get handed off to somebody else.
What Affects Chimney Cleaning & Sweep Pricing in Antioch
- What you burn. Wood-burning fireplaces build creosote faster than a gas insert, and that means more time on the flue. A home that burns regularly through the mild winter months will sit closer to the top of the sweep range than one that lights a fire a few times a season.
- Creosote stage. Light, flaky creosote comes off with a standard brush. Glazed, tar-like creosote – the toughest stage – takes more work to remove and may require chemical treatment first. If the technician can’t clear it safely in one visit, you’ll know before the job starts.
- Flue configuration. A straight flue on an exterior wall cleans faster than one with offsets, a tight smoke chamber, or an unusual damper setup. Mid-century ranch homes around Antioch often have layouts that take a bit longer than a simple modern flue.
- Roof pitch and access. Getting to the top of the chimney safely matters. A steep roof or a chimney tucked behind a roofline adds time, and time is what you’re paying for on a sweep.
- Inspection level. A Level 1 visual check usually rides along with a sweep at no extra cost. A Level 2 camera inspection is a separate line item, and it’s the right call after a home purchase, a change in fuel type, or any chimney fire.
- Repair findings. If the inspection turns up a deteriorating liner, you’re looking at either HeatShield resurfacing in the $1,800 to $3,600 range or a full DuraFlex reline at $3,500 to $7,000. We’ll tell you honestly which you need, and sometimes neither is the answer.
If you’re comparing numbers across the wider East Contra Costa market, it helps to know where your neighbors sit. Our Antioch pricing runs close to what you’ll see in the surrounding towns, and the cost drivers don’t change much from one side of the county to the other.
How to Save on Chimney Cleaning & Sweep
There aren’t coupons to chase here – the way to keep the bill down is to catch small problems before they turn into liner work. A few practical moves:
- Book the sweep before heavy fireplace season. When a flue comes in for cleaning already loaded with a full year of creosote, the sweep takes longer. An annual cleaning keeps the creosote stage low, and light creosote is quicker to remove than glazed.
- Keep a cap on the chimney. A missing or damaged cap lets rain, leaves, and birds into the flue, and all three add cleaning time. A new Gelco or Famco cap runs $180 to $450, which is well under what a blocked flue will cost you down the road.
- Burn dry, seasoned wood. Wet wood produces more creosote per fire. Drying your wood properly means less buildup and a faster sweep.
- Get the camera inspection done when it’s due. A $150 to $300 Level 2 inspection that catches a hairline liner crack early can save you a $3,500 reline. The reverse is also true – skipping it can cost you far more.
- Don’t reline if resurfacing will do. HeatShield resurfacing restores a deteriorating liner at roughly half the cost of a full reline. We do both, so you’ll get a straight recommendation, not a push toward the more expensive job.
- Take the free estimate. Our estimates cost nothing. Call (844) 352-4625, describe the fireplace or appliance, and we’ll give you a range before anyone comes out.
The same advice applies whether you’re scheduling a sweep or looking at chimney sweep Antioch services for the first time after moving into a house with an unfamiliar flue. A first-visit inspection is how you find out what you inherited.
FAQs – Chimney Cleaning & Sweep Cost
How much does a chimney sweep cost in Antioch?
A standard wood-burning sweep in Antioch runs $180 to $340, with most jobs landing near $250. Gas insert and heating appliance flues come in lower at $140 to $240. Call (844) 352-4625 for an exact quote – estimates are free.
Why did my neighbor pay less than I did?
Chimney jobs vary more than most home services. The $180 to $340 sweep range depends on what you burn, how much creosote has built up, how the flue is configured, and how accessible the roof is. Two houses on the same block can land at opposite ends of the range if one burns wood heavily and the other lights a gas insert twice a month. Call (844) 352-4625 and we’ll tell you where your setup likely falls.
Can you fix what the sweep finds, or do I need a separate contractor?
We handle the repair work ourselves, so a finding doesn’t turn into a referral. That includes HeatShield resurfacing for deteriorating liners ($1,800 to $3,600) and DuraFlex reline installation for cracked or undersized flues ($3,500 to $7,000). Caps and venting components through Gelco and Famco are part of the same visit. Call (844) 352-4625 for a free estimate.
Is it cheaper to resurface a liner or replace it?
Resurfacing is usually the lower-cost option. HeatShield resurfacing typically runs $1,800 to $3,600, while a full DuraFlex reline sits at $3,500 to $7,000. Resurfacing only works when the liner structure is still sound enough to hold the material, so the camera inspection is what decides it. Call (844) 352-4625 and we’ll tell you honestly which you need.
Can you come today?
Same-day service is often possible. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 352-4625 for a free estimate and we’ll find you the next opening.
Why Antioch Homeowners Call Us
Chimney work has a habit of splintering across three different companies. One sweeps, another inspects, a third repairs – and nobody is accountable for the whole flue. We cover sweeping, inspection, and repair together, which means the camera findings and the fix come from the same place. Your flue, liner, cap, and crown are one system. We service all of it.
We name the products we use because you should know what’s going into your chimney. That’s why we work with an industry-recognized roster of professional-grade brands: DuraFlex for flexible liner systems, HeatShield for liner resurfacing, Gelco and Famco for caps and venting components, and Olympia Chimney and Copperfield for the components that round out a system. Familiarity with these lines means we can specify and source the right part the first time, rather than ordering and hoping.
A note on chimney safety
Creosote is combustible, and a flue loaded with it is a fire waiting for a reason. We recommend a professional sweep and inspection for anything beyond a visual check with a flashlight, and we’d say the same about a roof visit. Walking a pitched roof and working a flue from the top is work for someone trained and equipped to do it. If you suspect a chimney fire has happened – cracked tiles, warped damper, distorted cap – stop using the fireplace and get an inspection before the next fire.
Getting Started
If your fireplace is overdue, or a previous inspector flagged something you haven’t dealt with yet, the first step is a free estimate. Call (844) 352-4625. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you’d rather compare costs across the wider area first, our Chimney Sweep Antioch page and the Brentwood chimney sweep cost guide both show how pricing stacks up nearby.
Written by the team at Chimney Sweep Antioch.
Pricing reflects the Antioch market as of 2026. Chimney Sweep Antioch offers free estimates – call (844) 352-4625.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Diego Salazar"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Devon Jackson"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Gilbert Reyes